There's no such thing as perfect exposure
I want to start here: there's no "correct" exposure and no magic number. For me, good exposure has more to do with the balance of the image than with a figure, and it depends on the scene. Exposure is a creative tool for telling the story. But careful: being creative doesn't let you off the hook on the technical side. That's exactly what lets you use it well.
If your scene happens at night, it's normal for the histogram to be piled up on the left and for the shadows not to hold much detail. And if a UFO with powerful lights lands that same night, a histogram that shoots off to the right makes sense too. Before you judge the numbers, look at what you're shooting.
Why I don't stop at the histogram
The histogram is the best-known tool, but I'm not that sold on it. It gives you the big picture of the image, but it doesn't tell you exactly which part is doing what. That's why I use two others: zebras and false color. Both show you very clearly which areas of the image are behaving differently.
What IRE is
Both tools measure the light and give it an IRE value (the unit comes from the Institute of Radio Engineers; a fun fact that changes nothing, but there you go). The scale runs from 0 to 100. It actually runs from -7 to 109, but let's keep it simple:
- 0 IRE is pure black: there's no detail and no way to get it back.
- 100 IRE is pure white: nothing left to save there either.
Log curves, like Sony's S-Log or Canon's C-Log, flatten that curve to hold more information in the highlights and the shadows. A confession, and I hope it doesn't let anyone down: I don't shoot S-Log. I use a more baked-in profile that's easier to grade, because, for me, the dynamic range I gain doesn't make up for the extra work Log asks for.
In practice, I try to keep most of the image inside the range, without touching 0 or 100. If blowing out the highlights or crushing the shadows is part of your look and you talked it through with the director, great. I'd rather not take options away from myself in post.
Zebras: they warn you when you hit a value
Zebras are those little stripes that sometimes show up on the monitor. The first time I saw them I freaked out: I didn't know what they were or how to turn them off, and I thought they were going to end up in the final image. Later I realized they're fantastic. You assign them an IRE value, and when any part of the image hits that value, the stripes appear over it.
- At 100 they show you what's already blown out. It's handy, for example, to know whether the sky in an exterior still has detail or is already a white blob.
- At 95 is how I use them: they warn me right before I overexpose, so I can back off before I mess up.
- For skin, the value depends on the manufacturer and the color profile. Sony, for example, suggests putting it around 70 to 75. Check the documentation for your profile before you lock in a number.
In the video my skin sits around 67, and at 75 it still holds detail. For interviews I usually keep the face anywhere from the 50s up to 75, depending on the scene. I'll say it again because it matters: these are guidelines, not rules.
False color: the full map of your image
False color is my favorite tool, although for a long time I didn't appreciate it because I didn't know how to read it. Now I use it every single day. It paints the image in kind of psychedelic colors, like Predator vision, and each color stands for a band of the IRE scale. Where zebras flag one value at a time, false color gives you the whole image at a glance, live.
On my monitor, red means there's no detail left in the highlights, and purple means pure black. In the video I bring the key light up until my face turns orange, right about to clip, and then I bring it down little by little until there's no yellow left and the skin moves between gray, pink and green. That way I adjust fast and accurately, without constantly changing the zebra value.
One thing: the color scale changes depending on the brand of the monitor, camera or transmitter. There's almost always a legend on the side of the screen, but read the manual before you use it.
Where to find them
Lots of cameras already have zebras. False color is more common on external monitors, on wireless video transmitters with an app, like Hollyland's, and on higher-end cameras. If your camera doesn't have it, don't panic: that's normal. If you can get an external monitor that has it, I can't recommend it enough.
And learning to read these values doesn't just help on set. It also helps you grade better once you get to post.
Gear I mention
- Atomos Shinobi (the monitor I use)
- Atomos Shinobi 7
- Atomos Ninja V
- OSEE G7
- Portkeys BM5 WR
- Hollyland Mars 300 Pro (wireless video transmitter with exposure tools in its app)
These are affiliate links: if you buy through them, I get a small commission at no extra cost to you.


