Chang 陈明

Cinematography · Lighting · Nov 17, 2026

How to light a "cinematic" black-and-white look with just two lights

With a discontinued panel, a 120d, some fabric and a fruit crate, I built a black-and-white night scene. Here's how I did it, step by step.

From my channel Me Dicen Chang · 35 min · Video in SpanishWatch on YouTube ↗

The idea: contrast, not color

This is one of the special episodes of Iluminando con Chang. For my birthday video I built a setup some of you have already seen, and here I'm rebuilding it from scratch to show you how I did it.

The interesting part is that it's all in black and white, so it's about contrast rather than color. It's a night scene with only two lights, and neither of them is one of the latest releases: that's exactly what I want to show, that you don't need the newest gear to make something beautiful.

The gear

  • Key: an Aputure LS1s. It's a panel that's actually been discontinued. I use it because it's the one I have, but it could be any other panel, from any brand.
  • Backlight: an Aputure 120d Mark II with a Fresnel.
  • Camera: the Sony A7S III, with my Atomos Shinobi monitor.
  • A Hollyland wireless transmitter. Since I'm on my own and away from the camera, I see on my phone exactly what the camera sees, instead of running over to check the frame and coming back.
  • Fabric and flags. I have an apple box, and I mean an actual fruit crate, full of diffusion and fabric. It's one of the most useful things you can have on any shoot.
  • Reflector holder arms. They're made to hold reflectors, but I use them to hang my fabrics. One of the best purchases I've ever made.

I recorded the audio with the Hollyland Lark M1. They sound pretty good, but I placed the mic badly and wasn't monitoring, so it clipped in places. My bad.

Step 1: the frame and a blank canvas

First, as always, comes the frame. To find it I crank the ISO all the way up, because at that point exposure doesn't matter. This time I didn't shoot 16:9 but 2.35:1, so I turned on the frame guides for that aspect ratio. And since I don't have anyone to stand in for me, I marked my spot with something pink, really eye-catching, so it's easy to find from the camera.

With the frame set, the next step is turning off all the lights to see what our blank canvas looks like. Only then do I start lighting.

Step 2: the direction of the key

My go-to trick: keep the side of the face toward the camera in shadow and bring the light from the opposite side. That creates a lot more depth and it's way more interesting. Before building anything, I use a light just to figure out the direction; color doesn't matter yet.

Step 3: the key, from hard to soft

If I turn on the LS1s bare, with nothing on it, the light is super strong and super hard. You can do it, but I definitely prefer diffusion. In false color everything shows up yellow and red, way overexposed, but that's fine: we're going to lose stops with the diffusion.

So I put a white fabric in front of the panel. Pay attention to this: the light has to hit as much of the fabric as possible. If you don't give it room, the diffusion doesn't work the way it should, so I pulled the panel back until it covered as much of the fabric as it could. And when something didn't fit the frame, I'd rather pan the camera a hair than move everything.

Since we're working in black and white, I set the monitor to monochrome. Then I brought the diffusion closer, a bit more frontal and more centered, so the shadow edge wasn't so hard. Remember: the closer the light source, the softer the light.

Step 4: get rid of what you don't need

With the key set, it's time to take light away from where I don't want it.

  • The background. The top of the key was spilling onto the wall, which showed up green in false color. I cut that light with a black cloth, because I want as much of the light as possible concentrated on my face.
  • The flare. That's what the flags on a matte box are for. Lots of people use one because it looks cool, but it actually does a job: close the flag down properly and the flare starts to disappear.
  • An improvised flag. Even with the matte box, light kept creeping in and creating a flare I'm not a big fan of. The fix was the fruit crate: I put it in front and it worked way better than the matte box. Basically, I built a giant matte box.
  • The spill in the corner. You have two options there: fix it with a power window in post, or solve it on set.

Moving the light to get rid of the flare made the image a lot darker. So I bumped the ISO to 12,800, the A7S III's second native ISO in Log, to have a lot more control over the image.

Step 5: more contrast with negative fill

The image was already looking pretty good, but I wanted a little more contrast. So I put a black flag on another stand, as close as possible without it creeping into frame. That negative fill takes light off the face, and the moment you bring it in you can see the contrast change.

Exposing a night scene

In false color, my skin falls right between the greens and grays, and that makes sense. If it were daytime, it would make sense for it to sit higher on the scale; but since it's a night scene, it's logical for it to sit lower.

Remember that exposure isn't a question of right or wrong: it depends on the circumstances, it changes from scene to scene, and it's one more creative tool.

Step 6: the backlight

To finish, the backlight. I used the 120d Mark II because I wanted a hard light, and to keep it from spreading so much I put a Fresnel on it, which focuses the light and gives you control over the direction. I put it on a C-stand and flew it out so it sat right behind me, out of frame and pointing down.

I moved some plants out of the way to make room and, since the floor was uneven and I wanted the stand tight against the wall, I leveled it with apple boxes. On a real project, be tidier than me: on the channel I'm one person doing everything.

With everything on, the backlight looked pretty strong, so I added an ND to get more control over the exposure. You're probably thinking: "Chang, that's weird, an ND at night?" Well, we're working at a super high ISO, and the A7S III can handle it.

The difference the backlight makes

If I turn everything off, what's left is the ambient light, which shows up because the ISO is so high. I turn on the key, then the back. And if I leave just the back on, you can see everything it brings: it fills in my outline and separates me nicely from the background. Without it, the image wouldn't feel nearly as cool.

Bonus tip: if you have a scene with rain, you need a light behind it so the rain actually shows up.

To recap: key with diffusion and a flag so it doesn't spill onto the background, negative fill, the fruit crate as an improvised flag, the ND and the backlight. You don't need that many lights when you place them well.

Art direction matters too

In black and white, art direction is just as important. I tested it with clothes: red reads as a middle gray and blue reads as a dark gray. And white? I'd avoid it completely, especially in this kind of scene, because it kills a lot of contrast. Dark things, on the other hand, hold onto it. I'm not a huge fan of white stuff.

If you're going to shoot something in black and white, do camera tests so you know how every color and every texture comes out.

From the wide shot to the close-up

When you build a scene, you shoot the wide coverage first and then go in tighter. On close-ups you can cheat quite a bit: you bring the lights in and, as long as you keep a ratio that makes sense, it looks natural and nobody wonders why.

For the close-up I moved the camera while keeping roughly the same direction, staying on axis. I brought the key in really close, right up to the edge of frame: the closer it is, the bigger the source and the softer the light. I brought the black flag in too, to keep the contrast. In the end, the face is sandwiched between the diffusion and the black.

In false color you lose detail in the darks, but it's black, so it doesn't matter. My skin is still in the grays, and we're good.

My takeaway

That's how easy it is. It's about playing with simple things, fabric and lights, to get a pretty cool frame. Cinematic? I wouldn't say that: everybody uses that word and it's very debatable (yes, I hate myself a little for putting it in the video's title). But it looks good, and all it took was two well-placed lights.

Gear I mention

These are affiliate links: if you buy through them, I get a small commission at no extra cost to you.

More notes