From the freebie filter to an obsession
Most of us discover filters the day we buy a camera and they throw in a cheap little UV filter. Back when everyone shot film, ultraviolet light really did affect exposure and color a bit. These days that UV filter is mostly there to protect the lens if you drop it, which isn't a bad thing, but filters can do so much more.
Formats: circular, square and the ones that go inside
- Circular. They're usually glass and go from 30.5 mm to over 100 mm. To find out which diameter you need, look on your lens for the ⌀ symbol with a number next to it. Almost all my lenses are 77 mm or smaller, so I buy 77 mm filters and use step-up rings.
- Square. The 4 × 4 and, especially in cinema, the 4 × 5.65. They can be acrylic or glass, and they need a matte box.
- Magnetic or snap-on, much smaller, for cameras like a GoPro or an Osmo Pocket.
- Rear and drop-in. Some very wide lenses take the filter between the lens and the sensor. And adapters like the EF to RF have a drawer to slide the filter in between. Those are super handy: you put the ND in once and don't have to swap it every time you change lenses.
I like to sort them into two groups: technical and creative.
Technical filters
ND: controlling your exposure
Neutral density (ND) filters give you control over your exposure. Picture a sunny day where you want shallow depth of field and, at the same time, organic motion that follows the 180-degree rule (shutter speed at double your frame rate). Instead of cranking the shutter up to 1/1000 or 1/8000, you use an ND to get down to 1/50.
Same thing in stills: an ND lets you drop your shutter speed in full sun, for example to give a river that silky texture. With an ND you can also get that more dreamlike sense of motion from some of Wong Kar-wai's films: slow shutter, and the ND makes up for it.
There are two families:
- Solid NDs. Much better quality. If you're doing more narrative work, where there's more time to swap filters, go for these.
- Variable NDs. The quality isn't as good, but they're way more convenient. For documentary, or when the exposure keeps changing on you, they're the perfect solution.
With variables, pay close attention to what you're buying: some tint the image magenta or green, or create weird patterns, especially the cheaper-quality ones. I use K&F Concept's, which are pretty good and inexpensive. I've heard great things about Freewell and PolarPro, though they cost a bit more.
A rule I repeat all the time: the more expensive and finer your lens, the more it pays to invest in the filter. All the optical design the manufacturer put into it can be ruined by a bad filter sitting in front.
IR: the contamination you can't see
We can't see infrared contamination, but sensors can. You notice it, for example, when a pure black starts looking reddish under certain lights. You can fix it in post, but that takes more work than putting the filter on from the start. Also, some NDs bring in a bit of infrared contamination themselves, so sometimes you'll have to combine the two.
Careful with stacking filters: the more you add, the higher the risk of vignetting and artifacts. Keep the count to a minimum, or look for combo filters like IRND (ND with IR cut), IRPL (polarizer with IR) or ND-PL. More and more brands are making them.
Polarizer: the bridge between technical and creative
I use the polarizer a ton for reflections: water, cars and, lately, people. On a car it helps you bring back the saturation in the bodywork, or decide whether the windshield reflects or not. In interviews, when light hits the skin and creates a shine, turning the polarizer can take it down almost completely, without running to makeup.
Graduated ND
It's denser at the top and gets lighter toward the bottom. It's great for sunsets where you need the sky well exposed and the ground too.
Creative filters
This is where you get kaleidoscope-style filters, flare filters, haze-effect filters and Black Mist, which is the one I've used most lately. Black Mist (and its lookalikes from various brands) lowers contrast and gives the image a more filmic, less digital finish. It also adds halation to the highlights: instead of an ugly hard white clip, the light blooms into a nice halo. It comes in different strengths: 1/4 is stronger and 1/8 is more subtle.
The good thing about creative filters is that they give you unique looks. The bad thing is that whatever you shoot that way stays that way: you can't take a kaleidoscope or a prism out in post. Think it through before you shoot with them.
Can't afford one? Make your own
You can experiment with a cheap UV: a bit of Vaseline for a dreamier look, fishing line for long streaky flares, or a half-broken UV for weird textures. For a homemade Black Mist, some people spray black paint into the air, without aiming straight at the filter, and let the fine spray drift down onto it: up close, a Black Mist is just particles that diffuse the light across the whole surface. It won't come out as consistent as a factory one, but if you feel like experimenting, it's not a bad idea.
Before you buy
- Don't be too cheap. The filter directly affects sharpness, how much light you lose and the color of your image.
- Buy the largest diameter you need and use step-up rings for the smaller lenses. Or go for 4 × 5.65 filters with a matte box, which fit almost all your lenses: they cost more, but they're usually better quality and they last for years.
- Expensive isn't always better. There are lots of comparisons on YouTube: check which one makes sense for you. I wanted some Tiffens, which were a bit pricier; I compared them with the K&Fs, they looked almost identical to me, and I saved myself about ten dollars.
- Rent it first. I've bought filters I ended up using exactly once. If you can't rent it, try a cheap version and, if you're going to use it professionally, only then invest in the good one.
- No filter is perfect. They all have a trade-off: you give something up to get something else.
On set
- If you're using a matte box, label the filter with a piece of tape as soon as you put it in, so the whole camera department knows what's mounted.
- Write the filters on the slate. If you have to reshoot tomorrow or repeat a similar scene, you'll know exactly what you used.
- Talk to the director and the art department before you use a filter that changes the look, because once it's shot, there's no going back.
Gear I mention
- K&F Concept variable ND (5 stops), the one I use
- Freewell variable ND (5 stops)
- Haida solid ND
- NiSi solid ND
- PolarPro ND + Black Mist
- K&F polarizer + ND, the one I use
- Tiffen polarizer
- K&F Black Mist 1/8 and 1/4
These are affiliate links: if you buy through them, I get a small commission at no extra cost to you.


